Workout timing · HIIT
HIIT Interval Timer Guide
Use Timer Plus custom intervals to follow the work and recovery periods in your existing HIIT plan. The 30/30 example below uses six work periods and five rests, finishing at 5:30 before preparation or extra breaks.
Set up the 30/30 HIIT example
Example values, not a training prescription or a verified app preset. Timer Plus has no rest after the last interval; the complete-pair calculations below explain a different ending.
| Setting or phase | Example value |
|---|---|
| Work | 30 seconds per work period |
| Rest | 30 seconds between work periods |
| Work periods | 6 |
| Finish | After work period 6: 5:30 total |
| Preparation and extra breaks | Add separately if your plan includes them |
Enter the durations and counts with the Timer Plus setup steps
See why this example has this ending in the detailed sequence and calculation
Six minutes, two ways to divide them
30/30 means 30 seconds of work followed by 30 seconds of recovery. Six complete pairs contain three minutes of work and three minutes of recovery: 6 × (30 + 30) = 360 seconds, or 6:00.
40/20 means 40 seconds of work followed by 20 seconds of recovery. Six complete pairs contain four minutes of work and two minutes of recovery: 6 × (40 + 20) = 360 seconds, or 6:00.
Both six-minute examples include recovery after the final work period. For 30/30, stopping after work period six removes the last 30-second recovery and gives 330 seconds, or 5:30.
Count preparation, extra recovery, warm-up and cool-down separately. Equal elapsed time describes the clock, not equivalent effort or training outcomes.
For other work/recovery pairs and a chosen ending, use the general duration formulas
Read the work–recovery cycle
Work → rest → repeat.
An interval is one part of a repeating timing pattern. This diagram explains the structure; it does not show Timer Plus controls or confirm app behavior.
One work period followed by recovery forms a complete pair. Repeat the pair the number of times in your chosen plan, with its ending made explicit.
What makes a schedule HIIT?
HIIT means high-intensity interval training. The time ratio describes work and recovery; the exercise and effort determine more than the clock can show.
Helgerud and colleagues studied both 15/15-second intervals and four-minute intervals. The study used defined training conditions, not a single universal ratio. A 30/30 schedule alone does not establish that a session is HIIT.
Sources: Helgerud et al. (2007) · PMID 17414804 · Abstract
Compare this structure with other workout timing patterns
Keep the exercise context with the schedule
From the research
“All training sessions were performed running on a treadmill”
Helgerud and colleagues used treadmill running with separately specified exercise and effort instructions. The timing examples on this page are separate arithmetic illustrations. The study did not evaluate Timer Plus.
Read a timer schedule as four separate parts
Hov’s treadmill study varied intensity, recovery and work volume together. The 30/30 and 40/20 examples above were not its tested protocols.
| Part | What the six-minute examples tell you |
|---|---|
| Schedule | The work and recovery lengths, six repeated pairs and an ending after recovery are specified. |
| Intensity | An effort target is still needed from the workout plan. Thirty or forty seconds of work does not specify how hard that work is. |
| Exercise | The seconds do not identify the movement or whether recovery means resting or moving. Running, cycling and body-weight exercises do not become the same protocol by sharing a timer pattern. |
| Scope | These examples calculate elapsed time. They do not measure a training result or establish that an app follows the same sequence. |
Sources: Hov et al. (2023 issue) · PMC10099854 · §2.4
See how these parts differ in the historical schedules in the Hov comparison
Match the complete sequence
Check the requirements for your own platform in the platform requirements checklist
Before deciding on an offer, review the purchase and access questions
EMOM timing: starts at each minute
When phase lengths vary, read the changing-sequence checklist
Check the ending and any changing phases
Illustrative clock schedules. A and B are phase labels, not exercise instructions. Preparation is additional; these examples do not establish an app preset.
Scroll sideways to see all columns
| Written sequence | Include the final recovery | Omit only the final recovery |
|---|---|---|
| Six 40-second work periods with 20-second recovery | 6 × (40 + 20) = 360 seconds, or 6:00. | 6 × 40 + 5 × 20 = 340 seconds, or 5:40. |
| A 30 seconds → recovery 20 → B 40 → recovery 20; repeat this whole group twice | 2 × (30 + 20 + 40 + 20) = 220 seconds, or 3:40. | 220 − 20 = 200 seconds, or 3:20. Earlier recoveries stay in place. |
Turn the written sequence into a timing check
Write the whole sequence
Record work, recovery, the number of work periods and the intended ending. Put changing exercises or breaks between groups in their actual order.
Match each phase to the controls
Compare your written sequence with the durations and repetition controls your installed timer provides. Check how it counts a round, cycle or repeat.
Follow a timing-only run
Count the phase changes and work periods, then compare the finish with the chosen total. No workout is needed for this check.
Check the conditions you will use
Repeat with your intended music, screen state and audio output. If you save a setup, reopen it and compare its values before reuse.
Compare the written sequence with your actual controls using the setup checklist
For the audio comparison, compare timer cues with music
For a separate screen-state check, check timing with the screen locked
Account for the Timer Plus ending
Explore Timer Plus
Open the listing for your device to review the current app details.
For the Apple listing and device checks, read the iPhone and iPad listing guide
For the Google Play listing and device checks, read the Android listing guide