Workout timing · Tabata
Tabata Timer: Understand 20/10 × 8
For the 20/10 example in Timer Plus, set eight 20-second work periods with 10-second rests between them. The last work period ends the block at 3:50; preparation and breaks between blocks add time separately.
Set up eight 20/10 work periods
The developer confirms there is no rest after the last interval. These are timing values, not verified current screen labels or an intensity recommendation.
| Setting or phase | Example value |
|---|---|
| Work | 20 seconds |
| Rest | 10 seconds between work periods |
| Work periods | 8 |
| Finish | After work period 8: 3:50 total |
| Final rest | None; the separate 4:00 written example below includes another 10 seconds |
Enter the durations and counts with the Timer Plus setup steps
See why this example has this ending in the detailed sequence and calculation
Does your block end at 3:50 or 4:00?
Eight 20-second work periods add up to 160 seconds, or 2:40 of work.
Add seven 10-second rests between them: (8 × 20) + (7 × 10) = 230 seconds, or 3:50. The block finishes as work period eight ends.
Include recovery after every work period: (8 × 20) + (8 × 10) = 240 seconds, or 4:00. This version ends after the final 10-second rest.
Use the ending specified in your workout plan. Preparation, warm-up, cool-down and any break after the block add time separately.
Count an extra break between blocks
Illustrative arithmetic: assume a written plan already specifies two complete 4:00 blocks and an additional 1:00 break. Each block includes its final 10-second recovery. Preparation and other phases are outside this example.
Scroll sideways to see all columns
| Part | Time included | Elapsed at its end |
|---|---|---|
| First complete block | 240 seconds, including the final recovery | 4:00 |
| Additional break between blocks | 60 seconds beyond the recovery already counted | 5:00 |
| Second complete block | 240 seconds, including the final recovery | 9:00 total: 240 + 60 + 240 = 540 seconds |
See where each version finishes
230 seconds without the final rest. 240 seconds with it.
- 8 × 20 s work + 7 × 10 s rest = 230 s.
- 8 × 20 s work + 8 × 10 s rest = 240 s.
Timing arithmetic only, not a training prescription. The Timer Plus team confirms no rest after the last interval: 20/10 with eight work intervals totals 3:50 before preparation. The dashed final rest illustrates the separate 4:00 calculation.
20 seconds of work × 8. Seven 10-second rests give 3:50; adding the eighth rest gives 4:00. Preparation and other phases are separate.
The timer pattern and the original study
The 1996 study by Tabata and colleagues examined a specific cycling protocol with seven to eight 20-second bouts and 10-second rests. Exercise and intensity were part of the experiment.
The familiar 20/10 timer pattern describes a schedule. Matching those seconds with another exercise does not reproduce the full research protocol or establish the same fitness outcomes.
Sources: Tabata et al. (1996) · PMID 8897392 · Abstract
Compare this structure with other workout timing patterns
The original protocol, in the authors’ words
From the research
“seven to eight sets of 20-s exercise”
The abstract describes a small cycling experiment with 20-second work periods and 10-second rests. The timer pattern alone does not reproduce the full study protocol.
Keep the chosen ending when setting the timer
For the elapsed-time calculations, see the 30/30 and 40/20 timing examples
Follow all eight work periods
Choose the final phase
Mark whether your plan stops after work period eight or includes one more 10-second recovery.
Match the sequence to the controls
Compare the controls in your installed timer with 20-second work, 10-second recovery and eight work periods. Check what its repeat count includes.
Observe the finish
During a timing-only run, count all eight work periods and watch the last transition. Compare the elapsed time with 230 or 240 seconds, plus any additional phases.
Listen to phase and ending cues
Note the cue at a phase change and the cue at the end separately. Repeat with the music and screen state you intend to use.
Compare the written sequence with your actual controls using the setup checklist
Check the requirements for your own platform in the platform requirements checklist
Before deciding on an offer, review the purchase and access questions
Before relying on that audio setup, compare phase and ending cues with music
Explore Timer Plus
Open the listing for your device to review the current app details.
For the Apple listing and device checks, read the iPhone and iPad listing guide
For the Google Play listing and device checks, read the Android listing guide