---
canonical_url: "https://intervaltimerplus.com/workouts/hiit/"
language: en-US
content_modified_at: null
content_sha256: c4264b47fc82db647fcf5e7314ce09b66b025b0b1ab8fde2d406309aa1e5740c
---

Workout timing · HIIT

# HIIT Interval Timer Guide

Use Timer Plus custom intervals to follow the work and recovery periods in your existing HIIT plan. The 30/30 example below uses six work periods and five rests, finishing at 5:30 before preparation or extra breaks.

## Set up the 30/30 HIIT example

Example values, not a training prescription or a verified app preset. Timer Plus has no rest after the last interval; the complete-pair calculations below explain a different ending.

| Setting or phase | Example value |
| --- | --- |
| Work | 30 seconds per work period |
| Rest | 30 seconds between work periods |
| Work periods | 6 |
| Finish | After work period 6: 5:30 total |
| Preparation and extra breaks | Add separately if your plan includes them |

Enter the durations and counts with [the Timer Plus setup steps](<https://intervaltimerplus.com/how-to-use/#DEV-custom-workout>)

See why this example has this ending in [the detailed sequence and calculation](<https://intervaltimerplus.com/workouts/hiit/#setup-30-30>)

## Six minutes, two ways to divide them

30/30 means 30 seconds of work followed by 30 seconds of recovery. Six complete pairs contain three minutes of work and three minutes of recovery: 6 × (30 + 30) = 360 seconds, or 6:00.

40/20 means 40 seconds of work followed by 20 seconds of recovery. Six complete pairs contain four minutes of work and two minutes of recovery: 6 × (40 + 20) = 360 seconds, or 6:00.

Both six-minute examples include recovery after the final work period. For 30/30, stopping after work period six removes the last 30-second recovery and gives 330 seconds, or 5:30.

Count preparation, extra recovery, warm-up and cool-down separately. Equal elapsed time describes the clock, not equivalent effort or training outcomes.

For other work/recovery pairs and a chosen ending, use the [general duration formulas](<https://intervaltimerplus.com/how-to-use/#duration-check>)

## Read the work–recovery cycle

Work, rest, repeat An interval cycle moves from a work period to a rest period and then repeats. It is a concept diagram, not an app screen. WORK REST REPEAT ONE CYCLE

Work → rest → repeat.

An interval is one part of a repeating timing pattern. This diagram explains the structure; it does not show Timer Plus controls or confirm app behavior.

One work period followed by recovery forms a complete pair. Repeat the pair the number of times in your chosen plan, with its ending made explicit.

## What makes a schedule HIIT?

HIIT means high-intensity interval training. The time ratio describes work and recovery; the exercise and effort determine more than the clock can show.

Helgerud and colleagues studied both 15/15-second intervals and four-minute intervals. The study used defined training conditions, not a single universal ratio. A 30/30 schedule alone does not establish that a session is HIIT.

 Sources:  [Helgerud et al. (2007) · PMID 17414804 · Abstract](<https://pubmed.ncbi.nlm.nih.gov/17414804/>)

Compare this structure with [other workout timing patterns](<https://intervaltimerplus.com/workouts/>)

## Keep the exercise context with the schedule

From the research

> “All training sessions were performed running on a treadmill”

 Jan Helgerud and colleagues  Treadmill-study methods · 2007 [Read the original source  ↗ ](<https://rcc.hslu.ch/fileadmin/user_upload/downloads/sport/Aerobic_High-Intensity_Intervals_Improve_J.Helgerud_2007.pdf#page=3>)

Helgerud and colleagues used treadmill running with separately specified exercise and effort instructions. The timing examples on this page are separate arithmetic illustrations. The study did not evaluate Timer Plus.

## Read a timer schedule as four separate parts

Hov’s treadmill study varied intensity, recovery and work volume together. The 30/30 and 40/20 examples above were not its tested protocols.

| Part | What the six-minute examples tell you |
| --- | --- |
| Schedule | The work and recovery lengths, six repeated pairs and an ending after recovery are specified. |
| Intensity | An effort target is still needed from the workout plan. Thirty or forty seconds of work does not specify how hard that work is. |
| Exercise | The seconds do not identify the movement or whether recovery means resting or moving. Running, cycling and body-weight exercises do not become the same protocol by sharing a timer pattern. |
| Scope | These examples calculate elapsed time. They do not measure a training result or establish that an app follows the same sequence. |

 Sources:  [Hov et al. (2023 issue) · PMC10099854 · §2.4](<https://pmc.ncbi.nlm.nih.gov/articles/PMC10099854/>)

See how these parts differ in [the historical schedules in the Hov comparison](<https://intervaltimerplus.com/guides/hiit-vs-tabata/#SCI-P16-PROTOCOLS>)

## Match the complete sequence

The examples use equal repeating pairs. Changing the work time, recovery or breaks between groups requires a different sequence. Before using either example as a Timer Plus setup, match the full sequence and its ending to the controls available in your installed version; a repeat label alone does not establish support for a circuit.

Check the requirements for your own platform in the [platform requirements checklist](<https://intervaltimerplus.com/features/#platform-matrix>)

Before deciding on an offer, review the [purchase and access questions](<https://intervaltimerplus.com/pricing/>)

[EMOM timing: starts at each minute](<https://intervaltimerplus.com/workouts/emom/>)

When phase lengths vary, [read the changing-sequence checklist](<https://intervaltimerplus.com/features/#custom-intervals>)

## Check the ending and any changing phases

Illustrative clock schedules. A and B are phase labels, not exercise instructions. Preparation is additional; these examples do not establish an app preset.

 Scroll sideways to see all columns  ↔ 

| Written sequence | Include the final recovery | Omit only the final recovery |
| --- | --- | --- |
| Six 40-second work periods with 20-second recovery | 6 × (40 + 20) = 360 seconds, or 6:00. | 6 × 40 + 5 × 20 = 340 seconds, or 5:40. |
| A 30 seconds → recovery 20 → B 40 → recovery 20; repeat this whole group twice | 2 × (30 + 20 + 40 + 20) = 220 seconds, or 3:40. | 220 − 20 = 200 seconds, or 3:20. Earlier recoveries stay in place. |

## Turn the written sequence into a timing check

1. ### Write the whole sequence

  

  Record work, recovery, the number of work periods and the intended ending. Put changing exercises or breaks between groups in their actual order.
2. ### Match each phase to the controls

  

  Compare your written sequence with the durations and repetition controls your installed timer provides. Check how it counts a round, cycle or repeat.
3. ### Follow a timing-only run

  

  Count the phase changes and work periods, then compare the finish with the chosen total. No workout is needed for this check.
4. ### Check the conditions you will use

  

  Repeat with your intended music, screen state and audio output. If you save a setup, reopen it and compare its values before reuse.

Compare the written sequence with your actual controls using the [setup checklist](<https://intervaltimerplus.com/how-to-use/>)

For the audio comparison, [compare timer cues with music](<https://intervaltimerplus.com/guides/interval-timer-with-music/>)

For a separate screen-state check, [check timing with the screen locked](<https://intervaltimerplus.com/guides/background-timer/>)

## Account for the Timer Plus ending

The complete six-minute examples above include a recovery after the last work period. The developer confirms that Timer Plus does not add that final rest. Six work intervals of 30 seconds with five 30-second rests total 5:30; six 40-second work intervals with five 20-second rests total 5:40. Preparation and any extra breaks are separate.

## Choose the next timing question

- [Tabata timing: 20/10 and the final rest](<https://intervaltimerplus.com/workouts/tabata/>)
- [the HIIT and Tabata timing comparison](<https://intervaltimerplus.com/guides/hiit-vs-tabata/>)
- [Helgerud et al. (2007) · PMID 17414804 · Abstract](<https://pubmed.ncbi.nlm.nih.gov/17414804/>)

## Explore Timer Plus

Open the listing for your device to review the current app details.

For the Apple listing and device checks, read the [iPhone and iPad listing guide](<https://intervaltimerplus.com/iphone/>)

For the Google Play listing and device checks, read the [Android listing guide](<https://intervaltimerplus.com/android/>)

[ View on the App Store  ↗ ](<https://apps.apple.com/us/app/timer-plus-workouts-timer/id1279716547>)[ View on Google Play  ↗ ](<https://play.google.com/store/apps/details?id=com.vgfit.timerplus>)
